Plastic greenhouses-wall construction-Bozong greenhouse


网站正在维护中,请稍后访问!

客服电话:18096387750


技术支持: 响应式网站建设

Bozong greenhouse

Plastic greenhouses-wall construction

Release time:2019-01-16 13:37

Practice has proved that no column commercial greenhouses on the wall's construction requirements higher, this is because its entire commercial greenhouses are made of steel frame, 3-3.5 meters a steel frame, steel frame the upper end by puzzle pillars connected with the back wall its overall weight was significantly heavier than commercial greenhouses column bamboo skeleton weight.

Therefore, we propose to build shanty requirements end of the wall to use bulldozers the compaction (north-south width of 6-8 meters), to prevent ground subsidence. And then, and then the excavator on earth, and on a 70 cm thick ripper, rolling back and forth with excavators 2-3 times. Back wall height of 4.5 m is appropriate, and finally to the top of the wall compaction. Also note, there must be a certain inclination when excavators cut commercial greenhouses wall, under the narrow width, inclination 6-10 degrees is appropriate.

Page Keywords: portable greenhouse, commercial greenhouses, commercial greenhouse, plastic greenhouse, glass greenhouse.

Scan the qrcode to reading this article on your phone

Copyright© Bozong greenhouse    Technical Support: 响应式网站建设
该网站使用响应式网站建设创建 立即创建